Olivetti Copia 9916 User Manual page 185

Hide thumbs Also See for Copia 9916:

Table of Contents

Press Start to begin scanning the document into memory.

Sending Documents

If you are asked to enter a sender's name, select one

(1 p. 4-11). If you do not wish to enter a sender's name, do

If you have set the document on the platen glass, follow steps

6 to 8 (1 p. 4-27). Once all pages are scanned into memory,

SCANNING P.001

IMAGEQUALITY

When the unit reaches the preset time, it sends the document

to the destination(s) you selected. The document is deleted

from memory after it is sent.

You can check the result of the transmission by printing the

TX Report (1 p. 12-7) or the Activity Report. (1 p. 12-5)

You can press more than one speed dialling button to send the

document to more than one location after the timer goes off. If

you want to enter the numbers with regular dialling for a

sequential broadcast, make sure you press Set after every fax

TX/RX NO.0004

BOOK SENDING