Table of Contents
Advertisement
3.
Press Direct TX.
Direct
TX
4.
Dial the other party's fax number.
5.
Press Start to begin sending.
Start
DIRECT
RESOLUTION
4-30
Sending Documents
The Direct TX lamp lights.
If you always use direct sending instead of memory sending,
you can set the unit to default to direct sending mode.
(1 p. 14-40)
Use one of the dialling methods described on page 4-21.
AUTO RX
123 4567
=
If you enter the wrong number, press Clear, then enter the
correct number.
If you enter more than one destination, the unit will
automatically switch to memory sending and scan the
document into memory.
ECM P.001
STANDARD
STANDARD
DENSITY
The unit calls the other party and sends the document.
During sending, the LCD displays the number of the page it is
sending, the TX/RX number, and the number of the other party.
To cancel the transmission, press Stop.
21/08 '99
DELETE
TX/RX NO.0004
TEXT
SHEET
IMAGEQUALITY
BOOK SENDING
Chapter 4
Advertisement
Table of Contents
