If you selected 03 TIME SETUP in step 9 (on p. 6-5):
Set
10. Press Set.
SELECT AN ITEM
11. Use the search buttons (d, u) to select the setting you want.
You can select from the following:
n
If you prefer to turn the memory lock mode on and off manually, you can
use the Memory Reception button. (1 p. 6-10)
12. Press Set.
Set
If you selected 02 ON in step 11, refer to the table on the next page
and follow these guidelines to select and register settings.
n
In order for your settings to be registered, be sure to press Set after
making a selection or entering information.
6-8
Using the Memory Features
TIME SETUP
01 OFF
Turns off the time setup. This is the default setting.
02 ON
Turns on the time setup. With this setting you can also set the
start and end times for selected days.
If you selected 01 OFF, press Stop to return to standby mode.
Use the search buttons (d, u) to move vertically through the
settings.
To register a setting or access sub-settings, press Set.
To return to a previous level, press Return.
01 OFF
02 ON
Chapter 6