Table of Contents
Advertisement
Important Information for Users in the United
Kingdom
Approval Number 609637
Your Olivetti machine has been approved against the requirements
of NTR3 for use in the UK. The CE mark is applied in
respect of the requirements of 72/23 EEC and 89/336 EEC.
It is intended for connection to analogue two wire public
telecommunication networks.
Olivetti recommend that any additional equipment connected in the
installation is connected to this "handset" socket. Do not connect
additional equipment through parallel sockets elsewhere on the
telephone line.
Voltage and current available at these sockets is determined by the
network to which the line cable is connected. They will not normally
exceed the limits for TNV as described in EN60950.
This equipment is not intended or recommended for making calls to
emergency services.
Preface
Connect the supplied cable to this socket first, then to the
telephone line.
This socket is intended for connection of the telephone.
If required, an adapter to connect any piece of approved
telecommunications apparatus is available from
your Olivetti supplier.
iii
Advertisement
Table of Contents
