Table of Contents
Advertisement
Changing Fax and Copy Default Settings
Settings used frequently can be registered as default settings. These are
the settings that the unit is set to after the power is turned on, or after a
period of time has elapsed between sending documents or copying
originals.
The factory default sending settings are as follows:
RESOLUTION
In addition to the above default settings, the default sending mode is
MEMORY SENDING, and the TX Stamp feature is set to OFF.
The factory default copying settings are as follows:
READY TO COPY
COPY RATIO PAPER SELECT
In addition to the above default settings, the default frame erase
width is 2 mm and the auto sort feature is set to OFF.
If you want to change the above default settings, follow the procedure on
the following pages.
Chapter 14
AUTO RX
READY TO SEND
=
STANDARD
STANDARD
DENSITY
100%
A4
21/08 '99
SAT 15:30
TEXT
SHEET
IMAGEQUALITY
BOOK SENDING
21/08 '99
SAT 15:30
1
TEXT
SCAN MODE
Summary of Important Settings
14-39
Advertisement
Table of Contents
