Changing/Deleting A Coded Speed Dialling Entry - Olivetti Copia 9916 User Manual

Changing/Deleting a Coded Speed Dialling Entry

If you want to change a coded speed dialling entry or delete all
information stored under a code, follow the instructions in "Registering
Numbers for Coded Speed Dialling" (1 p. 3-24) but note the following:
In step 6 (1 p. 3-25) , select the entry you want to change or delete.
For all other steps when you are required to make an entry:
• To correct an entire entry, press the Clear button, then enter the
new information.
• To correct a single digit in the fax/telephone number, use the l
button to move the cursor below the digit you want to change.
Press the F4 (DELETE) button, then enter the correct digit.
• To correct a character in the name, press the F2 (DELETE) button.
Every time the F2 button is pressed, the rightmost character is
deleted. Enter the correct character(s).
If you want to delete all information registered under a code, press
the Clear button in step 9 (1 p. 3-26), then press the Set button. To
return to standby mode, press the Stop button.
Chapter 3
3-39
Speed Dialling