Table of Contents
Advertisement
Use the search buttons (d, u) to select the optional setting you
5.
want to set.
You can select from the following:
01 TX TIME SETTING
Set up to five transmission times. (To set this setting 1 below)
02 TX TYPE
Specify the type of transmission. (To set this setting 1 p. 3-32)
03 INTERNATIONAL
Set if the number is a long distance number. (To set this setting 1 p. 3-36)
04 TX SPEED
Set the transmission speed. (To set this setting 1 p. 3-37)
05 ECM
Set Error Correction Mode (ECM) on or off. (To set this setting 1 p. 3-38)
Follow the appropriate instructions below depending on the setting
you selected.
If you selected 01 TX TIME SETTING in step 5 (above):
The TX TIME SETTING allows you to preset five sending times in a
24-hour period. Documents sent with this coded speed dialling code
will only be sent at the time you have specified. This feature is very
convenient when, throughout the course of a day, you send several
documents to the same destination. All documents destined for the
same destination will be grouped and sent at the closest preset time.
This reduces the number of calls to one, and saves you time and money.
n
You can also use this feature together with BATCH TX. If BATCH TX is
on, the documents will be grouped and sent together at the preset
time. (1 pp. 14-17, 14-38)
6.
Press Set.
Set
SELECT THE MEMORY NUMBER
3-30
Speed Dialling
01 – – : – –
02 – – : – –
03 – – : – –
04 – – : – –
TX TIME SETTING
05 – – : – –
Chapter 3
Advertisement
Table of Contents
