Table of Contents
Advertisement
Password
8.
If an ITU-T password is also required to start the relay broadcast,
press Password.
- or -
If a password is not required, go to step 11 on page 7-19.
n
You must press Password within five seconds of pressing Set. If you
wait longer than the time-out interval before pressing Password, the
unit will start scanning the document for sending. The time-out interval
can be turned off. (1 p. 14-18)
9.
Use the numeric keypad to enter the ITU-T password required to
ABC
DEF
1
2
3
start the relay broadcast on the other party's fax unit.
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
SYMBOLS
0
#
10. Press Set.
Set
7-18
Relay Broadcasting
PASSWORD
PASSWORD
0 9 8 7 6 5 4 3 2 1 #
The password can be up to 20 digits long, and can include h,
#, and spaces.
The password (and any spaces in it) must be exactly the same
as the other party's password.
To enter a space, press Space.
To delete the rightmost digit, press F4 (DELETE).
To correct an entire entry, press Clear.
If you have set the document on the platen glass, follow steps
6 to 8 on pages 4-27, then press Set.
DELETE
DELETE
Chapter 7
Advertisement
Table of Contents
