Table of Contents
Advertisement
Sending a Document to a Relay Unit for
Relay Broadcasting
Follow this procedure to send a document to a relay unit.
n
In this procedure, your unit is the originator.
Before you send a document to another fax unit for relay broadcasting,
confirm the following points on your unit:
Make sure your own unit fax/telephone number is correctly
registered. (1 p. 2-24)
Enter a subaddress.
Before you send a document to another fax unit for relay broadcasting,
contact the other party and confirm the following points about their fax
unit:
The relay unit must support ITU-T subaddress/password
transactions.
If you want a relay transmission report sent back to your unit from
the relay unit, ask the other party to turn this feature on when they
set up the relay function on their fax unit.
Make sure the relay unit has registered the fax numbers of all
destinations for speed dialling buttons.
Make sure you have the correct subaddress for the other party's fax
unit.
Confirm that the subaddress you have been given has been used to
set up the other party's fax unit as a relay unit. Your unit cannot
confirm whether or not the other party's fax unit has been set up
properly as a relay unit.
If an ITU-T password is set on the other party's fax unit you must
send the document with a password. Otherwise, the other fax unit
will not receive your document.
7-14
Relay Broadcasting
Chapter 7
Advertisement
Table of Contents
