Table of Contents
Advertisement
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.52) elapses after a copy or scanner
job is finished, or when the clear (
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Copy quantity
Exposure adjustment
Zoom
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power
shut-off mode (p.52) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
) key is pressed twice.
A5 A4
141
A4 B5
86
A4 A5
70
"0" is displayed in the display
1 copy
Auto
100%
2
13
Advertisement
Table of Contents
