Table of Contents
Advertisement
RX Settings Menu
Set
01ECM RX
Activate/deactivate ECM
(Error Correction Mode)
receiving.
Set
02REMOTE RX
Activate/deactivate fax
receiving from a
telephone connected
to the unit.
(1 p. 5-10)
Set
03MEMORY RX
Select whether or not
incoming faxes are to be
receives in memory if the
unit runs out of toner
paper. (1 p. 5-16)
Set
04RX PAGE FOOTER
Activate/deactivate
printing a footer in the
lower right corner of
faxes you receive. The
footer contains the date,
time received, transaction
number, and page
number. (1 p. 2-21)
Set
05N ON ONE PRINT
Activate/deactivate
printing from 2 to 5 pages
on a single sheet.
(1 p. 5-20)
14-20
Summary of Important Settings
01ON
Activate ECM.
02OFF
Deactivate ECM.
Set
01ID CALL #
Activate fax receiving by
dialling a code on the
telephone.
02HOOK
Activate fax receiving by
simply hanging up the
handset.
03OFF
Deactivate remote
receiving.
Set
01ON
The remainder of a fax is
stored in memory when
the toner or paper runs
out. It is printed out
automatically when the
toner cartridge is replaced
or paper is loaded.
02OFF
The remainder of a fax is
not stored in memory.
The other party must
resend the fax.
01OFF
Deactivate printing of the
footer.
02ON
Activate printing of the
footer.
01OFF
Deactivate N on one
printing.
02ON
Activate N on one
printing.
Default settings are shown in italic type.
REMOTE RX ID
Enter the code for remote
receiving. (0 to 99,h,#)
(Default: 25)
MEMORY RX ALARM
Select if the unit alerts
you when a document
has been received in
memory. Select OFF or
ON.
Chapter 14
Advertisement
Table of Contents
