Table of Contents
Advertisement
Touch-tone
A touch-tone or tone dial telephone is dialled by pressing buttons that send
tones of varying pitch to the telephone switching system.
Transaction number
When a document is scanned into or received in the memory, it is
assigned a transaction number (TX/RX). You can select documents in
memory for sending, printing, or deleting by specifying the transaction
number.
Transfer
A special feature you can set up on the unit to have all documents
received on the main unit transferred to another unit. For example, you
could have the main unit in the office transfer all documents to your fax
unit at home. You can set the day and time for this feature to turn on and
off. Please remember, however, that documents received in a confidential
mailbox or a memory box cannot be transferred. See Transfer password.
Transfer password
Protects the transfer settings from unauthorized access. You must enter
the transfer password, a four-digit code (0000-9999), in order to view or
change the transfer settings.
Transmission time
A fax transmission consists of three stages: the pre-message handshake,
the message transmission, and the post-message handshake. The
transmission time described in this User's Guide is not the total time
required for the entire transmission. It is only the time for the message
transmission. The transmission time described in this User's Guide is the
fastest time achieved when fax units communicate in the same mode.
TTI
Stands for transmit terminal identification. Also called sender information.
The TTI is the name of the person or organization and the fax number of
the fax unit that sends a document. In addition to a unit name that you
register for the unit, you can create up to 9 sender names that can be
selected and used in place of the unit name when you send a fax
transmission.
G-15
Glossary
Advertisement
Table of Contents
