Polling Sending
This section shows you how to set up your unit to store and hold a
document until it is polled by another fax unit to send it.
Before You Can Be Polled to Send
Before you set up your polling box, contact the parties who are going to
poll your unit to receive documents and confirm the following points:
The other parties must know your ITU-T subaddress number.
If you are also using an ITU-T password for the polling box, they
must also know this password. This password setting is optional.
Your TX PASSWORD must match the ITU-T password attached
when the other party calls you. Confirm that the TX PASSWORD on
your unit matches the ITU-T password attached when the other party
calls you.
If the other party's fax unit does not support ITU-T subaddress/
password transactions, you may be able to use the polling box #00.
Setting Up a Polling Box
Before you can use polling sending, you must create a polling box. The
polling box holds the document in memory until the other party polls
your unit to send the document.
Creating a Polling Box
Data Registration
1.
Press Data Registration.
SELECT AN ITEM
Chapter 9
REGISTRATION/SETTING
01 DATA REGISTRATION
02 TEL# REGISTRATION
Polling
9-21