16. Press Set.
Set
SELECT DEPT. ID
17. Press Stop to return to standby mode.
Stop
Setting Printing and Copying Restrictions
Follow this procedure to restrict access to printing and copying.
1.
Follow steps 1 to 6 of "Setting Sending Restrictions". (1 p. 11-9)
Use the search buttons (d, u) to select 02 PRINTER SETTINGS.
2.
SELECT AN ITEM
3.
Press Set.
Set
SELECT AN ITEM
11-14
Restricting Use of the Unit
ENTER DAC
You can now repeat steps 12 to 16 (1 p. 11-13) to enter other
department access codes and passwords.
RESTRICTIVE CODES
PRINTER SETTINGS
01
1425
02
03
04
05
01 TX SETTINGS
02 PRINTER SETTINGS
03 TEL SETTING
01 OFF
02 ON
Chapter 11