Table of Contents
Advertisement
STANDARD
Use this setting to send normal, typewritten or printed documents
containing only text and no drawings, photographs, or illustrations.
Standby
On and ready to use. All operations start from the standby mode where
the date and time are displayed.
SUPER FINE
This setting increases the clarity of documents you send. It is four times
the STANDARD resolution.
Switchboard
Also called a PBX (Private Branch Exchange) internal switching system.
You have to dial an outside line access number along with the regular
fax/ telephone number. The outside line access number must also be
registered. Depending on the system, you may also have to insert a
pause after the outside line access number. The pause button is factory
preset to enter a two or four-second pause. However, you can change the
pause time to suit your PBX or telephone system. Before adjusting the
pause time, check with your local authorised Olivetti dealer or the
Olivetti Lexikon Help Desk, or your local telephone company about the
correct pause time to use for your telephone system.
T
Timed sending
See delayed transmission.
Tone/pulse setting
This setting allows you to set the unit to touch tone (T) or pulse (P)
dialling, depending on the type of phone line you have installed.
TONE
You can switch temporarily from pulse to tone dialling by pressing
Tone/+ before dialling.
Toner cartridge
Your unit uses a patented Cartridge-H cartridge which contains both the
photosensitive drum and toner in one compact unit. For details about
disposing of used toner cartridges, contact your local authorised Olivetti
dealer or the Olivetti Lexikon Help Desk.
G-14
Glossary
Advertisement
Table of Contents
