Table of Contents
Advertisement
14. To continue registering the next setting (05 ERASE AFTER TX),
go to step 11 below.
-or-
To end registration of the polling box, press Stop to return to
Stop
standby mode.
If you selected 05 ERASE AFTER TX in step 10 (on p. 9-24):
Set
11. Press Set.
SELECT AN ITEM
12. Use the search buttons (d, u) to select the setting you want.
You can select from the following:
Set
13. Press Set.
14. To end registration of the polling box, press Stop to return to
Stop
standby mode.
Chapter 9
ERASE AFTER TX
01 OFF
The document in the memory box is not erased after it is
polled. Select this setting if you expect the document will be
polled by more than one fax unit.
02 ON
The document in the memory box is erased after it is sent
once in response to polling by another fax unit. This is the
default setting.
You can set up a total of 70 boxes in your unit for the
following: relay group, confidential box, polling box, preset
polling box, memory box, and transfer box. You can manage
each box with a password.
01 OFF
02 ON
Polling
9-29
Advertisement
Table of Contents
