Table of Contents
Advertisement
TX Settings Menu
Set
01 ECM TX
Activate/deactivate ECM
(Error Correction Mode)
sending.
Set
02 PAUSE TIME
Set the length of the
pause entered between
numbers with the Pause
button. (1 p. 3-3)
Set
03 AUTO REDIAL
Activate/deactivate
automatic redialing, and
select options for it.
(1 p. 4-38)
Set
04 BATCH TX
Activate/deactivate
batch transmission.
When activated, the unit
send documents in
memory destined for the
same destination at the
same time, instead of
faxing each document
separately. (1 p. 14-38)
Set
05 ERASE FAILED TX
Determine what happens
to a document in memory
if an error occurs during
its transmission.
(1 p. 12-7)
Set
06 TIME OUT
Set the interval between
dialling (entering
numbers) when sending
to more than one
destination.
Set
07 STAMP ACTION
Select which documents
are stamped. (1 p. 4-12)
14-18
Summary of Important Settings
01 ON
Activate ECM.
02 OFF
Deactivate ECM.
PAUSE TIME
Enter a pause time from 4
to 11 seconds.*
(Default: 4 seconds)**
Set
01 ON
Activate auto redialing.
02 OFF
Deactivate auto redialing.
01 ON
Activate batch
transmission.
02 OFF
Deactivate batch
transmission.
01 OFF
The document remains in
memory if an error
occurs during sending.
02 ON
The document is erased
from memory if an error
occurs during sending.
01 ON
The unit scans the
document in 5 or 10
seconds after entering a
fax number.
02 OFF
The unit does not
automatically scan a
document after an
interval.
***** 1-15 seconds in Australia, Singapore, Ireland,
01 DIRECT&MEMORY TX
Documents sent using
***** Two seconds in Australia, Singapore, Ireland,
direct and memory
sending are stamped.
***** Australia: 1-2 times, Singapore: 1-10 times,
02 DIRECT TX
Only documents sent
using direct sending are
stamped.
***** Australia, Malaysia, Hong Kong: 1-99
***** New Zealand: 6 minutes.
Default settings are shown in italic type.
Set
01 REDIAL TIMES
Select the number of
times the unit redials.
Set
02 REDIAL INTERVAL
Select the time between
redialling.
Set
03 TX ERROR RESEND
Select if you want the
unit to resend a fax when
an error occurs during a
previous attempt.
New Zealand, and Malaysia.
New Zealand, and Malaysia.
New Zealand: 1-5 times, Ireland: 1-4 times,
Malaysia: 1-15 times.
minutes, New Zealand: 6-99 minutes.
REDIAL TIMES
Enter the number of
times the unit redials (1
to 3 times).***
(Default: twice)
REDIAL INTERVAL
Enter the time between
redialling (2 to 99
minutes).****
(Default: 2 minutes)*****
01 ON
Resend if an error occurs
during sending. If you
select this option, press
Set, then select what
pages you want to resend.
(01 ALL PAGES, 02
ERROR & 1ST PG , 03
ERROR PAGE)
(1 p. 12-7 for details.)
02 OFF
Select not to resend.
Chapter 14
Advertisement
Table of Contents
