Printing a Received Document in the Correct
Page Order
Your unit receives documents by piling the pages as they are received in
the output tray. Therefore, the document you receive will be in the
reverse page order to that sent by the other party. If you want your
documents to be printed in the correct page order to avoid having to
rearrange the pages when they are received, change the PRINT IN
ORDER setting to ON. (1 p. 14-22)
The illustrations below show the order in which the document is received
depending on whether or not you have enabled the PRINT IN ORDER
setting.
SENT DOCUMENT
Document sent in
A, B, C order
If you enable the PRINT IN ORDER setting, the unit receives all
pages of the document in memory first, and then prints them out. For
this reason, reception takes longer.
If there is not enough memory to receive a document in memory, the
document will not print in order even if the PRINT IN ORDER
setting has been enabled.
Chapter 5
YOUR UNIT
PRINT IN ORDER setting
disabled.
C, B, A order
Reception
Receiving Documents
PRINT IN ORDER setting
enabled.
A, B, C order
Reception
5-19