Polling Receiving; Before You Poll Other Fax Units; Polling Other Fax Units To Receive A Document - Olivetti Copia 9916 User Manual

Polling Receiving

Before You Poll Other Fax Units

Before you try to set up polling, note the following points:
With one operation you can poll several fax units. You can dial up to
210 telephone numbers and poll those fax units to receive documents
that they are holding.
You can poll a document at any time, but you may find it more useful
to set your unit for polling other fax units at specified times
throughout the day. (1 p. 9-7)
You must know if the other fax unit is holding the document under
both a subaddress and password or only a subaddress or password.
You must also know the subaddress and password so you can enter
them on your unit. If you do not know the subaddress or password,
contact the other party.
If the other party's document(s) are registered for polling without a
subaddress or password, you can still perform polling receiving.
If the other party's fax unit does not support ITU-T subaddress/
password transactions, you can ask them to set the polling ID to 255
or 1111 1111 binary if the other party's fax unit is a Olivetti fax unit.

Polling Other Fax Units to Receive a Document

Follow this procedure to poll another fax unit to receive the document that
it is holding. This procedure starts polling the other fax unit immediately.
1. Press FAX to switch to fax mode.
FAX
2. Open all three one-touch speed dialling panels, then press
Polling.
SELECT AN ITEM
Polling
Chapter 9
POLLING
01 POLLING TX
02 POLLING RX
Polling
9-3