Scanning A Document Into Memory For Polling Sending - Olivetti Copia 9916 User Manual

Scanning a Document into Memory for Polling Sending

Before your unit can perform polling sending, you need to create a
polling box where the document can be stored. (1 p. 9-21)
Before the other party polls your unit, be sure to inform them of the
subaddress you have set.
You can restrict who polls your unit by setting a TX password.
You can set several polling boxes with different documents so that
the other party can poll whichever document they need.
If the other party's fax unit does not support subaddresses, or if you
want the other party to be able to poll your unit without a
subaddress, use polling box #00. Only polling box #00 allows the
other party to poll your unit without a subaddress.
Follow this procedure to scan a document into the polling box. The
document will remain in the polling box to be polled by other fax units.
1. Press FAX to switch to fax mode.
FAX
2. Prepare the document and load it, face down, in the Automatic
Document Feeder (ADF). (1 p. 4-4)
RESOLUTION
9-34
Polling
You can also set the document directly on the platen glass.
(1 p. 4-25)
AUTO RX DOCUMENT READY
=
STANDARD STANDARD
DENSITY
If necessary, you can adjust the resolution, density and image
quality for your document. (1 p. 4-17)
You can set the sender's name with the TTI Selector.
(1 p. 4-11)
21/08 '99
SAT 15:30
TEXT SHEET
IMAGEQUALITY BOOK SENDING
Chapter 9