Table of Contents
Advertisement
What is Speed Dialling?
Speed dialling allows you to streamline and customise dialling
procedures by registering a fax/telephone number and other important
settings for that number under a button or code. You can then dial that
number by pressing only one or a few buttons.
Speed Dialling Methods
The three speed dialling methods that can be used with this unit are as
follows:
One-Touch Speed Dialling ( 2 pp. 3-8, 3-49)
One-touch speed dialling allows you to send a document or dial a
telephone number by pressing only one button. You can register up to 84
destinations for one-touch speed dialling. The first group of buttons
numbered 1 to 28 are on the operation panel. Open the first one-touch
speed dialling panel to access buttons 29 to 56. Similarly, open the second
one-touch speed dialling panel to see the last set of buttons 57 to 84.
Coded Speed Dialling ( 2 pp. 3-24, 3-52)
Coded speed dialling allows you to send a document or dial a telephone
number by pressing the Coded Dial button followed by a three-digit
code of your choice. While coded speed dialling requires you to press
more buttons, it allows you to register up to 116 numbers.
Group Dialling ( 2 pp. 3-40, 3-55)
Group dialling allows you to dial a group of registered one-touch and/or
coded speed dialling fax numbers. By registering a group for one-touch
or coded speed dialling, you press only one or four buttons to send the
same document to several destinations.
The following pages describe how to register numbers for speed dialling.
You will also find instructions for changing numbers and names
registered under speed dialling buttons and codes, and how to use speed
dialling.
3-2
Speed Dialling
Chapter 3
Advertisement
Table of Contents
