Table of Contents
Advertisement
Use the search buttons (d, u) to select the setting you want.
7.
SELECT AN ITEM
Set
8.
Press Set to register your setting.
9.
Press Stop to return to standby mode.
Stop
Refilling the Stamp Ink Compartment
If the stamp printed on the documents you send becomes faint, follow
this procedure to refill the stamp ink compartment.
n
Use yellow ink only. Please contact your local authorised Olivetti dealer
or the Olivetti Lexikon Help Desk for advice on the type of ink you
require.
1.
Remove any documents from the Automatic Document Feeder
(ADF).
2.
Turn the power switch off.
c
Be sure to turn the power off before refilling the stamp ink
compartment. Not doing so may cause electric shock.
Chapter 4
STAMP ACTION
Select 01 DIRECT&MEMORY TX to stamp all documents you
scan for direct, manual, and memory sending. This is the
default setting.
Select 02 DIRECT TX to stamp only documents you scan for
direct and manual sending.
01 DIRECT&MEMORY TX
02 DIRECT TX
Sending Documents
4-15
Advertisement
Table of Contents
