Operation at the Sending System
When sending originals by encrypted transmission, use the Address Book registered for encryption or set
encrypted transmission when dialing directly using the numeric keys.
NOTE:
Encrypted transmission can be also used in broadcast transmission.
With encryption communication, you cannot conduct sub address communication.
FAX No. Entry:
0123456789*
[ Chain
FAX Detail:
Encrypted TX: 2/ 4
Off
Encryption:
1 *Off
2
On
*********************
A b
] [ Detail ]
C b
[
Change
]
a b
6-24
1
Register the encryption key you have arranged
with the receiving system. (Refer to Registering an
Encryption Key on page 6-22.) When an
encryption key has already been registered, go to
the next step.
2
Press the FAX key.
3
Place the originals.
4
Use the numeric keys to enter the FAX number of
the other party, and press [Detail] (the Right
Select key).
NOTE:
When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
5
Press the
or
6
Press [Change] (the Right Select key).
7
Press the
or
8
Press the OK key.
Setup and Registration
key to select [Encrypted TX].
key to select [On].