Turning Transfer Mode On And Off; Turning Transfer Mode On - Olivetti Copia 9916 User Manual

Turning Transfer Mode On and Off

You can use this procedure to move the unit in and out of the transfer
mode provided the timer has not been set to switch the unit in and out of
the transfer mode automatically. If the timer has been set to move the
unit in and out of the transfer mode automatically, you can still use this
procedure to set the unit in transfer mode before the timer switches the
unit into transfer mode.

Turning Transfer Mode On

Follow this procedure to turn the transfer mode on manually at any time.
1. Press FAX to switch to fax mode.
FAX
RESOLUTION
2. Open all three one-touch speed dialling panels, then press
Transfer.
Transfer
RESOLUTION
5-34
Receiving Documents
AUTO RX READY TO SEND
=
STANDARD STANDARD
DENSITY
If you have registered a password, use the numeric keypad to
enter your four-digit password, then press Set.
The unit is now in the transfer mode and will transfer
documents to the destinations you specified in the transfer
setup file. (1 p. 5-27)
AUTO RX TRANSFER
=
STANDARD STANDARD
DENSITY
21/08 '99
SAT 15:30
TEXT SHEET
IMAGEQUALITY BOOK SENDING
21/08 '99
SAT 15:30
TEXT SHEET
IMAGEQUALITY BOOK SENDING
Chapter 5