Table of Contents
Advertisement
Confidential sending
There are two ways to use confidential sending. One is to first register the
procedure with a one-touch speed dialling button. After you register the
procedure, all you have to do is feed the document into the unit and
press the button. The other way is to press the Confidential Mailbox
button and dial.
D
Default
The unit is programmed in the factory with settings that we recommend.
These are known as factory default settings. You can customise your unit
by programming settings other than the factory default settings. For
details, see Chapter 14 of this User's Guide.
Delayed transmission
With delayed transmission (also called timer sending), you can set a time
for the document to be sent. You do not have to be in the office when the
document is sent at the specified time. You can also send the same
document to more than one destination at a preset time. If you
frequently send the same document to several destinations, you can save
time by using group dialling.
Density control
You can darken or lighten documents that you send or receive with
buttons on the operation panel.
Destination label
Attachable label used to label one-touch speed dialling buttons on the
unit. Write the name of the other party on the label and then attach the
label above the button where the fax/telephone number is registered.
Dialling methods
Dialling numbers at the press of one or a few buttons. To use automatic
dialling, you must register the fax numbers in the memory of the
machine. The dialling methods are:
•
Regular dialling
•
One-touch speed dialling
•
Coded speed dialling
•
Group dialling
Glossary
G - 3
Advertisement
Table of Contents
