Table of Contents
Advertisement
Set
5.
Press Set.
Set
6.
Press Set.
SELECT AN ITEM
7.
For details on the settings you can select and how to change them,
follow the procedure from step 10 on page 9-9.
8.
After you have made changes to your selection, press Set.
Set
n
To delete any settings, press Clear, then press Set.
9.
Press Stop to return to standby mode.
Stop
9-18
Polling
ENTER A 4-DIGIT ID NUMBER (0000–9999)
If you have not set the password, you can skip this step.
If you have entered a password, use the numeric keypad to
enter the four-digit password. To protect your password, it
will not be shown in the LCD display when you enter it.
CHANGE DATA
To change the password, enter the current password (it will
not be shown in the LCD display), press Set, then enter the
new password.
01 FILE NAME
02 PASSWORD
03 SELECT LOCATIONS
04 START TIME
Chapter 9
Advertisement
Table of Contents
