Table of Contents
Advertisement
To enter letters:
1.
Press F4 (INPUT MODE) to select CAPITAL LTR or SMALL
INPUT MODE
LETTER.
F4
2.
Press the appropriate button on the numeric keypad to enter the
ABC
DEF
1
2
3
letter.
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
SYMBOLS
0
#
3.
Enter the next letter. If the next letter you want to enter is under a
different button, simply press that button until it appears.
-or-
If the next letter you want to enter is under the same button you
just pressed, press r to move the cursor to the right. Then press
the button you want and continue pressing it until the letter you
want appears.
2-16
Getting Started
ENTER UNIT NAME (UP TO 24 CHARACTERS)
DELETE
ENTER UNIT NAME (UP TO 24 CHARACTERS)
C
DELETE
Refer to the table on the previous page if you are unsure
which button to press for the letter you want.
Keep pressing the button until the letter you want appears. If
you go past the letter you want, you will have to keep on
pressing the button until it reappears.
You can enter symbols by pressing # until the symbol you
want appears. ( 1 p. 2-15)
To enter a space, press Space.
CAPITAL LTR
INPUT MODE
Select CAPITAL LTR
or SMALL LETTER
with F4 button
CAPITAL LTR
INPUT MODE
Chapter 2
Advertisement
Table of Contents
