Operating the Unit with Restrictions On
This section describes how to operate the unit with the operation
restriction features set up and turned on.
Sending a Document with Restrictions On
Follow this procedure to send a document after department access codes
(DAC) and passwords have been set up.
1.
Press FAX to switch to fax mode.
FAX
2.
Prepare the document and load it, face down, in the Automatic
Document Feeder (ADF). (1 p. 4-4)
RESOLUTION
3.
Dial the other party's fax number.
Chapter 11
You can also set the document directly on the platen glass.
(1 p. 4-25)
AUTO RX
DOCUMENT READY
=
STANDARD
STANDARD
DENSITY
If necessary, you can adjust the resolution, density and image
quality for your document. (1 p. 4-17)
You can set the sender's name with the TTI Selector.
(1 p. 4-11)
Use one of the dialling methods described in Chapter 4.
(1 p. 4-21)
21/08 '99
SAT 15:30
TEXT
SHEET
IMAGEQUALITY
BOOK SENDING
Restricting Use of the Unit
11-17