Table of Contents
Advertisement
Set
03 MEMORY BOX
Set up a general memory
box to handle ITU-T
subaddress and
password transactions.
(1 p. 6-23)
Chapter 14
01 SETUP FILE
Create a memory
box. Press Set.
Set
SET BOX #
01 FILE NAME
01 FILE NAME
01 FILE NAME
Specify a number
Specify a name for
for the memory
the memory box.
box (00 to 99).
02 PASSWORD
Assign a password to
02 CHANGE DATA
protect the memory
Change a memory
box settings.
box settings. Press
Set.
03 SUBADDRESS
You must enter a
SET BOX #
subaddress in order to use
Enter the memory
the memory box features.
box number you
04 TX PASSWORD
want to change. If
Specify an ITU-T
you set a password
password.
when setting up the
05 RX PASSWORD
box, press Set,
Specify an ITU-T
enter the password,
password.
then press Set
again. You can now
06 RECEIVE
change any of the
Activate/deactivate
receiving.
settings listed
above (01 SETUP
FILE).
03 DELETE FILE
Delete a memory
box. Press Set.
SET BOX #
Enter the memory
box number you
want to change. If
you set a
password when
setting up the box,
press Set, enter
the password,
then press Set
again.
08 TX REPORT
Send a TX report from your unit to
the originator. Press Set, then select
NOT TRANSMIT or TRANSMIT .
09 TX START TIME
Set the unit to hold the document
from the originator and relay it at a
specified time. Press Set, select a free
line, press Set, and enter the time.
10 RELAY B'CAST
Turn relay broadcasting off
temporarily without canceling or
changing all relay box settings. Press
Set, then select ON or OFF.
Set
Set
Set
ENTER A BOX NAME
ENTER A BOX NAME
Enter then memory box name.
Set
ENTER A 4-DIGIT ID NUMBER
Enter a 4-digit password.
Set
SUBADDRESS
Enter the subaddress.
Set
TX PASSWORD
Enter the password.
Set
RX PASSWORD
Enter the password.
Set
01 YES
If you select YES, press Set, then
you can select the options below.
01 SELECT ORIG UNIT
Check if the originator is registered
in your unit. Press Set, then select
ON or OFF . If you select ON, press
Set again, then enter the fax
number of the originator.
02 PRINT RX DOC.
Activate/deactivate printing of
documents received in the memory
box. Press Set, then select ON or
OFF. If you select ON , press Set
again, then select the PRINT
METHOD ( AUTO , MAN.) and the
number of copies you want printed.
(# OF RX COPIES)
(For details on accessing these
settings 1 p. 6-31.)
02 NO
The unit does not receive.
Summary of Important Settings
14-27
Advertisement
Table of Contents
