Table of Contents
Advertisement
Set
06 TRANSFER
Set up transfer file to
transfer documents to
other units. (1 p. 5-26)
14-30
Summary of Important Settings
Set
01 SETUP FILE
01 FILE NAME
01 FILE NAME
01 FILE NAME
Create a file to
Specify a name for
receive and transfer
the file.
documents.
02 SELECT LOCATIONS
Specify the fax number
02 CHANGE DATA
you want documents
Change the transfer
transferred.
file settings. Press
03 PASSWORD
Set. If you set a
Assign a password
password when
setting up the file,
to protect the
transfer file settings.
press Set, enter the
password, then press
04 SELECT ORIG UNIT
Set again. You can
Select the fax
now change any of the
numbers of the fax
settings listed above
units you want to
(01 SETUP FILE).
receive documents
from for
transferring.
03 DELETE FILE
Delete the transfer
05 TIME SETUP
file. Press Set. If
Set the time to enter
you set a password
and leave transfer
when setting up
mode.
the file, press Set,
enter the password,
then press Set
again.
06 PRINT RX DOC.
Set the unit to print a
copy of the
transferred document
at the transfer unit.
Set
Set
Set
ENTER A BOX NAME
ENTER A BOX NAME
Enter the file name.
Set
SPECIFY THE DESTINATION
Enter the fax numbers (registered for
speed dialling).
Set
ENTER A 4-DIGIT ID NUMBER
Enter a four-digit password.
Set
01 OFF
Do not select the originator(s).
02 ON
Select the originators. If you select
this setting, press Set, then enter the
fax numbers of the units (using
speed dialling).
Set
01 START TIME
Set a time(s) to enter transfer mode
automatically.
01 EVERYDAY
Enters transfer mode every day.
Press Set, select a free line, press
Set again, then set the start time.
02 SELECT DAYS
Enters transfer mode on selected
days. Press Set, select a day,
press Set again and select a free
line. Then set the start time.
02 END TIME
Set a time(s) to leave transfer mode
automatically.
01 EVERYDAY
Leaves transfer mode every day.
Press Set, select a free line, press
Set again, then set the end time.
02 SELECT DAYS
Leaves transfer mode on selected
days. Press Set, select a day,
press Set again and select a free
line. Then set the end time.
Set
01 OFF
01 OFF
Received and transferred documents
are not printed at the transfer unit.
02 ON
02 ON
A copy of every document
received and transferred is
printed at the transfer unit. Press
Set, then select the number of
copies you want printed.
Chapter 14
Advertisement
Table of Contents
