Table of Contents
Advertisement
6.
For details on the settings you can select and how to change them,
follow the procedure from step 10 on page 7-6.
n
To delete any settings, press Clear, then Set.
7.
When you are finished making changes, press Stop to return to
Stop
standby mode.
Deleting a Relay Group
1.
Follow steps 1 to 6 of "Creating a Relay Group". (1 p. 7-4)
Use the search buttons (d, u) to select 03 DELETE FILE.
2.
SELECT AN ITEM
Set
3.
Press Set.
7-12
Relay Broadcasting
To turn off the relay feature for the group and retain the setup,
press the search buttons to display 10 RELAY B'CAST, press
Set, and turn this feature off. You do not have to delete the
relay group to disable it temporarily.
To change the operation password, first you have to enter the
old password (it is not displayed as you enter it) and then you
have to enter the new password (it is displayed as you enter
it).
RELAY TX GROUP
SET RLY TX GROUP#
0 0
–
01 SETUP FILE
02 CHANGE DATA
03 DELETE FILE
+
Chapter 7
Advertisement
Table of Contents
