Sending With The Relay Broadcast Button - Olivetti Copia 9916 User Manual

Sending with the Relay Broadcast Button

Follow this procedure to send a document for a relay broadcast with the
Relay Broadcast button.
n
You can set only one destination.
1. Press FAX to switch to fax mode.
FAX
2. Prepare the document and load it, face down, in the Automatic
Document Feeder (ADF). (1 p. 4-4)
RESOLUTION
3. Open all three one-touch speed dialling panels, then press Relay
Broadcast.
Relay
Broadcast
RESOLUTION
7-16
Relay Broadcasting
You can also set the document directly on the platen glass.
(1 p. 4-25)
AUTO RX DOCUMENT READY
=
STANDARD STANDARD
DENSITY
If necessary, you can adjust the resolution, density, and image
quality for your document. (1 p. 4-17)
You can set the sender's name with the TTI Selector.
(1 p. 4-11)
AUTO RX ENTER THE DESTINATION
=
STANDARD STANDARD
DENSITY
21/08 '99
SAT 15:30
TEXT SHEET
IMAGEQUALITY BOOK SENDING
21/08 '99
SAT 15:30
TEXT SHEET
IMAGEQUALITY BOOK SENDING
Chapter 7