1
2
3
4
5
6
7
The following table lists the parameters in the example and gives a description of each.
Parameter
User Priority
Traffic Class
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command in Privileged EXEC mode to display
the current IP DSCP mapping to internal traffic classes for a specific interface.
Syntax
show classofservice ip-dscp-mapping
•
Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Example
console#show classofservice ip-dscp-mapping
IP DSCP
418
QoS Commands
1
6
4
3
4
5
6
Description
The 802.1p user priority value.
The traffic class internal queue identifier to which the user
priority value is mapped.
Traffic Class