Configure Command Fabric Parameters - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

The configure command is navigated using a series of menus. Top level
menus and associated submenus consist of a text prompt, a list of acceptable
values, and a default value (in brackets).
Use the following options to control input:
Return
Interrupt (Ctrl-C)
End-of-file (Ctrl-D)
Fabric Parameters
There are a number of settings which control the overall behavior and operation of
the Fabric. Some of these values, such as the domain, are assigned automatically
by the Fabric and may differ from one switch to another in the fabric. Other
parameters, such as the BB credit, can be changed for specific applications or
operating environments, but must be in agreement among all switches to allow
formation of the fabric.
The Fabric parameters are as follows:
Table 2: Configure Command Fabric Parameters
Domain
BB Credit
R_A_TOV
E_D_TOV
Data Field Size
Sequence Level Switching
Disable Device Probing
Suppress Class F Traffic
Sync IO Mode
Fabric OS Version 3.1.x/4.1.x Reference Guide
When entered at a prompt with no preceding input, accepts
the default value (if applicable) and moves to the next
prompt.
Aborts the command immediately and ignores all changes
made. This keystroke is common on many computers, but
can be different on your system.
When entered at a prompt with no preceding input,
terminates the command and saves changes made. This
keystroke is common on many computers, but may be
different on your system.
Field
(V3.1.x only)
Default
1 1..239
16 V3.1.x = 1 to 27
V4.1.x = 1 to 16
10000 4000..120000
2000 1000 to 5000
2112 256 to 2112
0 0 or 1
0 0 or 1
0 0 or 1
0 0 or 1
configure
Range
151