Fabric OS Commands
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Operands
This command has the following operand:
cfgName
Example
To enable the zone configuration "Test_cfg":
switch:admin> cfgEnable "Test_cfg"
zone config "Test_cfg" is in effect
See Also
cfgAdd
cfgClear
cfgCreate
cfgDelete
cfgDisable
cfgRemove
cfgSave
cfgShow
cfgTransAbort
cfgtransshow
108
This command requires an Advanced Zoning license.
"Security
Commands" on page 941.
Specify the name of a zone configuration to enable in
quotation marks. This operand is required.
Fabric OS Version 3.1.x/4.1.x Reference Guide