HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 540
Hp storageworks fabric os v3.1.x/4.1.x reference guide (aa-rs24c-te, june 2003)
Hide thumbs
Also See for StorageWorks MSA 2/8 - SAN Switch:
- Reference manual (394 pages) ,
- User manual (270 pages) ,
- Installation manual (72 pages)
Table of Contents
Advertisement
Fabric OS Commands
portnumber
[1 | 2]
Example
To enable ISL R_RDY mode on switch port 3:
switch:admin> portcfgislmode 3, 1
Committing configuration...done.
ISL R_RDY Mode is enabled for port 3. Please make sure the PID
formats are consistent across the entire fabric.
switch:admin>
To disable ISL R_RDY mode on switch port 3:
switch:admin> portcfgislmode 3, 0
Committing configuration...done.
switch:admin>
See Also
portCfgShow
540
Specify a port number. Valid values for port number
vary depending on the switch type. This operand is
required.
Specify 1 to enable ISL R_RDY mode. Specify 0 to
disable ISL R_RDY mode. This operand is required.
Fabric OS Version 3.1.x/4.1.x Reference Guide
Advertisement
Table of Contents
