Operands
This command has the following operands:
ports
(V3.1.x only)
-ports itemlist
(V4.1.x only)
Fabric OS Version 3.1.x/4.1.x Reference Guide
— ALL_LB_PORTS
— SINGLE_PORT
pattern used in testing.
seed used in testing.
User Delay value.
Total iteration value.
Current test iteration.
Total Fails on this test.
Consecutive Fails on this test.
porttest Start Time.
porttest Stop Time.
Timeout value.
Error code if any.
Specify the port to stop the test on. If omitted, the test
will be executed on all possible ports. Default value is
-1 stop the test on all ports.This operand is optional.
Specify a list of user ports to test. By default all the user
ports in the current slot will be assumed. See
itemlist help pages for further details.
porttestshow
625