Fabric OS Commands
agtcfgDefault
Reset the SNMP agent configuration to default values.
Synopsis
agtcfgDefault
Availability
AdminAdmin
Release
V3.1.x and V4.1.x
Description
Use this command to reset the configuration of the SNMP agent to default values.
Note:
This command is specific to the logical switch you are logged into.
The following values are reset to default:
sysDescr
sysLocation
sysContact
22
In the StorageWorks Core switch, there is one SNMP agent per logical switch.
The system description. The default value is Fibre Channel
Switch.
The location of the system. The default value is End User
Premise.
The contact information for the system. The default value is
Field Support.
Fabric OS Version 3.1.x/4.1.x Reference Guide