HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 940

Control Processor Commands
Table 27: StorageWorks Core switch Standby CP Commands (Continued)
myrid
reboot
savecore
timeout
uptime
version
940
Command Notes
Display current login ID details.
Reboot this processor. When executed from
the Standby CP, only the Standby CP is
rebooted.
FTP or Remove core files generated by
daemons.
Set or display the idle timeout value for a
login session.
Display how long switch has been up.
Display firmware version information.
Fabric OS Version 3.1.x/4.1.x Reference Guide