HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 531

Operands
This command has the following operand:
slotnumber
(V4.1.x only)
portnumber
Example
To display the filter CAM utilization for all ports on a switch:
switch:admin> portcamshow
Port 0 to Port 15:
-----------------------------
Port SID used
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
11 0
12 0
13 0
14 0
15 0
-----------------------------
Quad ports (SID Free, DID Free)
0-3 (64, 512)
switch:admin>
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify the slot number for a StorageWorks Core switch.
For all other switches this operand is not required. The slot
number must be followed by a slash ( / ) and the port
number, so that each port is represented by both slot
number (1 through 4, or 7 through 10), and port number
(0 through 15).
The StorageWorks Core switch has a total of 1–10 slots.
Slot number 5 and 6 are control processor cards, and slot
1 through 4, and 7 through 10, are port cards. On each
port card, there are 16 ports counted from the bottom, 0 to
15.
Specify a port number. Valid values for port number vary
depending on the switch type. This operand is required.
DID used
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
4-7 (64, 512) 8-11 (64, 512) 12-15 (64, 512)
portcamshow
531