qloopDelete
Delete a QuickLoop.
Synopsis: V3.1.x
qloopDelete "qloopName"
Synopsis: V4.1.x
qloopDelete "name"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to delete a QuickLoop.
This command changes the Defined Configuration. For the change to be preserved
across switch reboots, it must be saved to non-volatile memory using the
cfgSave command. For the change to become effective, an appropriate zone
configuration must be enabled using the cfgEnable command.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Operands
The following operands are required:
qloopName
(V3.1.x only)
name
(V4.1.x only)
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security
Commands" on page 941.
Specify the name of QuickLoop, in quotation marks.
qloopDelete
653