HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 169

-gbic_mode mode
(V4.1.x only)
-norestore mode
(V4.1.x only)
-ports itemlist
(V4.1.x only)
Example
To execute a functional test of all the ports on a switch 100 times:
switch:admin> crossporttest 100, 1
Running Cross Port Test .......
One moment please ...
switchName:
switchType:
switchState:
switchRole:
switchDomain:
switchId: fffc01
switchWwn: 10:00:00:60:69:00:73:71
port 0: cu Testing
port 1: sw Testing
port 2: sw Testing
port 3: lw Testing
port 4: lw Testing
port 5: sw Testing
port 6: sw Testing
port 7: sw Testing
port 8: sw Testing
port 9: sw Testing
port 10: sw Testing
port 11: sw Testing
port 12: sw Testing
port 13: sw Testing
port 14: sw Testing
port 15: cu Testing
Passed.
switch:admin>
Fabric OS Version 3.1.x/4.1.x Reference Guide
The gbic_mode parameter may be used to override
the global GBIC mode described above for the
duration of this test. Specify 1 enable gbic_mode,
and the testing is limited to user ports with GBICs or
SFPs installed.
Specify 1 to force the test to skip part of the post-test
cleanup normally performed. This may be helpful
during debug. This parameter should normally be left
at the default value of 0.
Specify a list of user ports to test. By default all of the
user ports in the current switch or logical switch will
be tested. This option may be used to restrict testing to
the specified ports.
switch
2.2
Testing
Disabled
1 (unconfirmed)
Loopback->15
Loopback->11
Loopback->6
Loopback->4
Loopback->3
Loopback->8
Loopback->2
Loopback->12
Loopback->5
Loopback->14
Loopback->13
Loopback->1
Loopback->7
Loopback->10
Loopback->9
Loopback->0
crossPortTest
169