Portcfgspeed - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

portCfgSpeed

Configure the port speed level.
Synopsis: V3.1.x
portCfgSpeed portnumber, speed_level
Synopsis: V4.1.x
portCfgSpeed [slotnumber/]portnumber, speed_level
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to configure the speed of a port to a particular level. After this
command is issued, the port is disabled and enabled so that the port comes up with
the new speed setting. The configuration is saved in the non-volatile memory and
is persistent across switch reboots or power cycles.
If the command is specified without an operand, you are prompted to enter the
speed value.
The output of the portShow command displays the current achieved speed of a
port and the portCfgShow command displays the user desired speed setting
for a port.
556 Fabric OS Version 3.1.x/4.1.x Reference Guide