HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 372

Fabric OS Commands
masterPort
defaultCost
cost
delay
lastScn
lastScnTime
upCount
lastUpTime
downCount
lastDownTime
downReason
iState
state
nghbCap
nghbId
idbNo
remPort
nflags
initCount
&dbRetransList
&lsrRetransList
&lsrAckList
372
Port number of the trunk master port, if present, of the
trunk group this port is a part of.
The default cost of sending a frame over the ISL
connection to this interface.
Cost of sending a frame over the ISL connected to this
interface. A value of 1000 indicates a 1 Gb/s link. A
value of 500 indicates a 2 Gb/s link.
Conventional delay incurred by a frame transmitted on
this ISL. A fixed value required by the FSPF protocol.
Type of the last State Change Notification received on
this interface.
Time the last State Change Notification was received on
this interface.
Number of times this interface came up, with respect to
FSPF.
Last time this interface came up.
Number of times this interface went down.
Last time this interface went down.
Type of last State Change Notification that caused this
interface to go down.
Current state of this interface. The state can be UP or
DOWN. An interface in DOWN state does not have an
allocated neighbor data structure and cannot be used to
route traffic to other switches.
Current state of this interface. This E_Port is used to route
traffic to other switches only if the state is "NB_ST_FULL."
Neighbor capabilities. Should be 0.
Domain ID of the neighbor (adjacent) switch.
IDB number. Should be equal to portnumber
Port number on the remote switch connected to this port.
Internal FSPF flags.
Number of times this neighbor was initialized, without
the interface going down.
Pointer to the database retransmission list.
Pointer to the Link State Records (LSR) retransmission list.
Pointer to the Link State Acknowledgements (LSA)
retransmission list.
Fabric OS Version 3.1.x/4.1.x Reference Guide