HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 844

Fabric OS Commands
Operands
This command has the following operands:
-parameters
-short
844
Invokes the diagsetcycle command before starting
the burnin run. This will allow users to modify the burnin
parameters prior to the run. These diagsetcycle
parameters are copied to all switches in the system and
override the original settings in the database. If the
diagsetcycle parameter is not specified, then the run
will use the previously stored values. This option does not
performs a burninerrclear operation prior to
starting the testing operation.
Sets the burnin parameters that control the number of
frames to 1. The primary use for this command is for
software regression testing, or a quick validation that all
hardware is operational. The shorter test cycle will not have
enough test time to detect intermittent errors. This option
performs a burninerrclear operation prior to
starting the testing operation.
Fabric OS Version 3.1.x/4.1.x Reference Guide