Secpolicyactivate - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

secpolicyactivate

Apply defined policy set to all switches in the fabric.
Synopsis
secpolicyactivate
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to activate the current defined security policy to all switches in
the fabric. After activation the defined policy set becomes the active policy set.
Note:
FCS switch. See
Operands
None.
Example
To activate the defined security policy set to all switches in the fabric:
primaryfcs:admin> secpolicyactivate
About to overwrite the current Active data.
ARE YOU SURE (yes, y, no, n): [no] y
Committing configuration...done.
Saving Defined FMPS ...
done
Saving Active FMPS ...
done
primaryfcs:admin>
Fabric OS Version 3.1.x/4.1.x Reference Guide
When security is enabled, this command can only be issued from the Primary
"Security Commands" on page 941.
secpolicyactivate
701