Fabric OS Commands
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Operands
This command has the following operand:
pattern
pattern
mode
Example
To show all zone configuration configurations that start with "Test":
switch:admin> cfgShow "Test"
cfg:
Test1 Blue_zone
cfg:
Test_cfg Red_zone; Blue_zone
114
This command requires an Advanced Zoning license.
"Security
Commands" on page 941.
(V3.1.x only)
(V4.1.x only)
(V4.1.x only)
Specify a string of characters enclosed in quotation
marks used to match zone configuration names. This
operand must be in quotation marks. Patterns can
contain:
Question mark "?" that matches any single
character
Asterisk "*" that matches any string of characters
Ranges which match any character within the
range. For example, [0-9] or [a-f].
This operand is optional.
A POSIX style regular expression used to match zone
configuration names. The pattern must be enclosed in
quotation marks. Patterns may contain:
Question mark "?" that matches any single
character
Asterisk "*" that matches any string of characters
Ranges which match any character within the
range. For example, [0-9] or [a-f].
This operand is optional.
Specify 0 to display the contents of the transaction
buffer (the contents of the current transaction), or
specify 1 to display the contents of the non-volatile
memory. The default value is 0. This operand is
optional.
Fabric OS Version 3.1.x/4.1.x Reference Guide