Non-Standard Messages; Fabric Watch Messages For The Switchstatuspolicyset Command - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Non-Standard Messages

Fabric Watch Messages for the SwitchStatusPolicySet Command

The messages in this section appear due to configurations that you can set with the
switchStatusPolicySet command. For more information on these
messages, refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference
Guide Guide.
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Fabric Watch Version 3.1.x/4.1.x User Guide
Warning FW-TOPOERR, 3, ISL topo error, port:<port #>; remote
port:<port#>; Remote switch: <switch name>; status: <state string>
The ISL port between port # on switch A is mismatched with port # on
remote switch, or not correctly cabled.
This feature requires special configuration. For more information, refer to
the islTopoCheck command in the HP StorageWorks Fabric OS
Version 3.1.x/4.1.x Reference Guide Guide.
Warning FW-TOPOMSG, 3, ISL topo OK, port:<port #>; remote
port:<port#>; Remote switch: <switch name>; status: <state string>
The ISL between two switches is OK now.
This feature requires special configuration. For more information, refer to
the islTopoShow command in the HP StorageWorks Fabric OS Version
3.1.x/4.1.x Reference Guide.
Warning FW-STATUS_PORT, 3, Port # is online
Explains that the LED state of port # is online.
This message is informational. Respond to this message as is appropriate to
the particular policy of the end-user installation.
Warning FW-STATUS_PORT, 3, Port # is without signal
Explains that the LED state of port # is "without signal."
Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference
Guide for information on the switchStatusPolicySet command.
Warning FW-STATUS_PORT, 3, Port # is not online
Explains that the LED state of port # is not online.
Responding to Fabric Watch Messages
163