Secmodeenable - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

secmodeenable

Enable security mode.
Synopsis
secmodeenable ["fcsmember;fcsmember"]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to enable security mode on all switches in the fabric. This
command fails if any switch in the fabric is not capable of enforcing the security
policies defined in the security database. If no operand is specified the command
becomes interactive.
Note:
This command sets up security in the fabric by executing the following:
Fabric OS Version 3.1.x/4.1.x Reference Guide
sectelnet must be used to open a secure telnet session into a switch.
Activates security mode on all switches in the fabric
Creates the security database populated with a list of FCS switches in the
FCS_POLICY
Distributes the security database to all switches in the fabric
Resets the Root, Factory, Admin, and User account passwords on all FCS
switches
Resets the Admin account password on all Non FCS switches
Disables the Root, Factory, and User accounts on all non-FCS switches in the
fabric
secmodeenable
691