HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 781

-verbose mode
(V4.1.x only)
-ports itemlist
(V4.1.x only)
Example
To run spinsilk on a switch:
switch:admin> spinsilk 2
Running Spin Silk .............
One moment please ...
switchName:
switchType:
switchState:
switchRole:
switchDomain:
switchId:
switchWwn:
port 0: cu Testing
port 1: sw Testing
port 2: sw Testing
port 3: lw Testing
.
.
.
Transmitting ... done.
Spinning ...
port 0 Rx/Tx 1 of 1 million frames.
port 1 Rx/Tx 1 of 1 million frames.
port 2 Rx/Tx 1 of 1 million frames.
port 3 Rx/Tx 1 of 1 million frames.
.
.
.
Fabric OS Version 3.1.x/4.1.x Reference Guide
For lb_Mode == 2,3 the following speed modes are
available to test fifo underrun.
3,5: set all even ports' speed for 2 Gbit/sec, set all odd
ports' speed for 1 Gbit/sec.
4,6: set all even ports' speed for 1 Gbit/sec, set all odd
ports' speed for 2 Gbit/sec.
Specify a non-zero value, to display more detailed
information during the test. This mode should be used for
debugging purpose. This operand is optional.
Specify a list of user ports to test. By default all of the user
ports in the current switch are tested. This option may be
used to restrict testing to the specified ports.
switch
2.2
Testing
Disabled
1 (unconfirmed)
fffc01
10:00:00:60:69:00:73:71
Loopback->15
Loopback->11
Loopback->6
Loopback->4
spinSilk
781